Barco MCM-100S User Manual page 72

10. Basic operation
Field 1 (Left)
Left
Stereo Sync
Right
Left
Stereo Sync
Right
Image 10-43
Stereo Swapped fields
It is also possible to select only field 1 or only field 2 This will, of course, remove the stereoscopic effect in the projected image.
The swap field function acts at the input while the Invert Stereo (see Display setup) acts on the stereo emitter
output.
How to swap the fields ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Input stereo sync
5. Press → to pull down the menu
6. Use ↓ or ↑ to select Swapped Fields
Image 10-44
7. Press ENTER
A white bullet shows the active setting
How to select a field ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
68
Field 2 (Right)
Normal
Swapped fields
Field 1 (Left)
t
R5905187 MCM-100S 05/06/2012