Power Connector Part Numbers - Galil Motion Control DMC-21 5 Series User Manual

Power Connector Part Numbers

Overview
The DMC-21x5 uses Molex connectors for connecting DC Power to the Amplifiers, Controller, and Motors. This
section gives the specifications of these connectors. For specific Galil amplifier information , refer to the dedicated
amplifier/driver section in Accessory Components .
The type of connectors on any given controller will be determined by how the controller is powered. Table A.1
indicates the type of Molex Connector used.
Power to Controller
6 pin, 5V, +/-12V Power
4 pin, DC24 or DC48 Power
Appendices ▫ 141
On Board Connector
MOLEX# 26-03-4061
MOLEX# 26-03-4041
Table A.1: Molex connector part numbers for different power options
Terminal Pins
MOLEX# 08-50-0189
MOLEX# 08-50-0189
DMC-21x5 User Manual 1.0a1