ADLINK Technology COM Express Express-BL User Manual page 61

Feature
Aggressive LPM Support
SATA Controller Speed
SATA Port Configuration
Software Feature Mask Configuration
RAID0
RAID1
RAID10
RAID5
Intel Rapid Recovery Technology
OROM UI and BANNER
HDD Unlock
LED Locate
IRRT Only on ESATA
Smart Response Technology
OROM UI Delay
7.3.4.1. SATA > SATA Port Configuration
Feature
SATA Port Configuration
Port X
Hot Plug
External SATA
SATA Device Type
Spin up Device
Options
Enabled
Disabled
Default
Gen1
Gen2
Gen3
Submenu
Info only
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Options
Info only
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Hard Disk Drive
Sold State Drive
Disabled
Enabled
Description
Enable PCH to aggressively enter link power state.
Indicates the maximum speed the SATA controller can support.
Enable/Disable RAID0 feature.
Enable/Disable RAID1 feature.
Enable/Disable RAID10 feature.
Enable/Disable RAID5 feature.
Enable/Disable Intel Rapid Recovery Technology.
If enabled, then the OROM UI is shown. Otherwise, no OROM
banner or information will be displayed if all disks and RAID volumes
are Normal.
If enabled, indicates that the HDD password unlock in the OS is
enabled.
If enabled, indicates that the LED/SGPIO hardware is attached and
ping to locate feature is enabled on the OS.
If enabled, then only IRRT volumes can span internal and eSATA
drives. If disabled, then any RAID volume can span internal and
eSATA drives.
Enable/Disable Smart Response Technology.
If enabled, indicates the delay of the OROM UI Splash Screen in a
normal status.
Description
Enable/Disable SATA Port.
Designates this port as Hot Pluggable.
External SATA Support.
Identify the SATA port is connected to Solid State Drive or Hard
Disk Drive.
On an edge detect from 0 to 1, the PCH starts a COMRESET
initialization sequence to the device.
Express-BL
Page 61