CEStronics CES OMEGA FLEX Assembly And Operating Manual page 71

11.7.2 Deactivating block mode
Required:
Block-Master (must be authorised for the locking device beforehand)
l
Procedure:
Steps
3. Hold the Block-Master in the reading field of the locking device.
Block mode is deactivated.
4. Remove the Block-Master from the reading field of the locking device.
Block mode is now deactivated. Access is now possible again with authorised locking
media.
Troubleshooting:
Signal
1x long red
Wide shield replacement handle set ILS-I
Cause
An opening mode with higher priority is currently act-
ive.
The Block-Master is not authorised.
11.7 Block mode
Signal
2x short green
Solution
Deactivate the
opening mode with the higher pri-
ority.
Authorise the
Block-Master.
Page 71 of 83