About This Manual; Manufacturer And Service - CEStronics CES OMEGA FLEX Assembly And Operating Manual

1.1 Manufacturer and service

1 About this manual

This assembly and operating manual, hereinafter referred to as the 'manual', will help you to assemble and
use the electronic handle set you have purchased safely and easily for the purpose intended. Any person
who assembles, manages, maintains or disposes of electronic handle sets must have read and understood
the full content of this manual.
If you do not understand certain functions of the OMEGA FLEX system, please contact your CEStronics
partner for further information.
This manual must be treated as a part of the product and must be kept throughout the entire service life of
the product. You should pass the manual on to any subsequent user or owner of the product.
The information and data in these documents are subject to change without prior notice. No part of this
document may be copied or distributed for any purpose without the express written consent of C.Ed.
Schulte GmbH Zylinderschlossfabrik.
© 2022 C.Ed. Schulte GmbH Zylinderschlossfabrik, Velbert, Germany
BRO2309 -2 Version: VB1
Always use the most up-to-date version of this manual. You can obtain updated versions free of
charge from www.ces.eu.
Notes on trademark protection
MIFARE, MIFARE Classic, MIFARE Ultralight and MIFARE DESFire are registered trademarks of NXP B.V. and
are used under licence.

1.1 Manufacturer and service

C.Ed. Schulte GmbH
Zylinderschlossfabrik
Friedrichstr. 243
42551 Velbert, Germany
Page 4 of 83
Tel: +49 (0) 2051-204-0
Fax: +49 (0) 2051-204-229
www.ces.eu
info@ces.eu
Wide shield replacement handle set ILS-I