CEStronics CES OMEGA FLEX Assembly And Operating Manual page 66

11.5 Locking media
11.5.3 Deleting all locking media authorisations simultaneously
Only those locking medium authorisations are deleted that were added using the same Program-
Master that is being used to delete them.
These step-by-step instructions show you how to delete all locking device authorisations while
keeping the Program-Master stored in the locking device. Alternatively, you can also delete the
Program-Master from the locking device, and this will also delete all locking device authorisations
that were added using this Program-Master.
Procedure:
Steps
1. Hold the Program-Master in the reading field of the locking device for approx. 5 seconds.
The Program-Master is deleted.
2. Remove the Program-Master from the reading field of the locking device.
The Program-Master and all locking medium authorisations that were added with this Program-Master are now
deleted from the locking device.
Page 66 of 83 Wide shield replacement handle set ILS-I
Signal
2x short
green