Steps
1. Hold the RF-Trace-Master in the reading field of the locking device for approx. 1 second.
The RF-Trace-Master is accepted.
2. The locking device now indicates the quality of the wireless connection:
During testing, the Access-Point linked to the locking device uses the same signals
to indicate the quality of the wireless connection.
3. Hold the RF-Trace-Master in the reading field for approx. 1 second.
Testing and signalling of the wireless connection quality is complete.
The testing and signalling of the wireless connection quality is automatically
terminated after 3 minutes.
Troubleshooting:
Signal
After step 1:
1x
long red
Wide shield replacement handle set ILS-I
11.10 Checking the quality of the wireless connection
Excellent
Adequate
Weak
No wireless connection
Cause
The locking device is not a NET or VA
variant.
Signal
1x
short green
1x
long green
Solution
The RF-Trace-Master can only be used with NET and
VA devices.
Page 77 of 83