System error
If system errors occur, they are signalled after the following actions:
After reading authorised locking media
l
After an attempt to put a handle set into release mode or emergency mode
l
After the start sequence (insertion/connection of batteries)
l
Signal
Cause
3x
short red
System error: The actuator of the locking device is
2x
long red
not working correctly.
Wide shield replacement handle set ILS-I
9.2 Loss of a locking medium
Solution
Check whether the actuator has jammed.
If you cannot resolve the error yourself,
contact your CEStronics partner.
Page 53 of 83