Authorising Additional Master Media - CEStronics CES OMEGA FLEX Assembly And Operating Manual

11.2 Authorising additional master media

Required:
System-Master (must be authorised for the locking device beforehand)
l
Master medium to be authorised
l
All master media must be authorised prior to their first use. Exception: RF-Ini-Master (in NET and VA devices) and RF-
Trace-Master.
Procedure:
Steps
1. Hold the System-Master for roughly 1 second in the reading field of the locking device.
'Authorisation mode' has been started.
2. Now you can authorise any number of master media in succession by holding each master
medium in the reading field of the locking device for about 1 second.
The master medium has been authorised.
Wide shield replacement handle set ILS-I
11.2 Authorising additional master media
Signal
1x short green
1x short green
ter medium
after each mas-
Page 57 of 83