Operation - CEStronics CES OMEGA FLEX Assembly And Operating Manual

3.3 Which system components does OMEGA FLEX include?

5 Operation

Target group of this section::
End users
l
Electronic handle set
Hold your locking medium in front of the
electronic handle set until it flashes green
once.
Office function
The office function allows you to put a locking device into permanently open status for a limited period. Your locking medium must be
authorised for this function. See your system administrator for further information.
Error signals
Error signal
The locking device cannot be used: when
the locking medium is held in front of it,
it flashes red four times instead of green.
Page 12 of 83
Then you can open the door.
Meaning
The locking medium was not read
correctly or is not authorised.
Wide shield replacement handle set ILS-I
If the door is locked, you must unlock it
with a key.
Hold your locking medium in front of the
locking device until it flashes green twice
(short - long). Office mode is now
activated.
To deactivate office mode, hold your
locking medium in front of the locking
device again until it flashes green twice
(long - short).
Solution
Hold the locking medium in front of the
locking device again. If the error signal
continues to appear, contact your system
administrator.