Table of Contents
Advertisement
2 SAFETY
2.7 Operation
Earth moving machines are only to be operated and serviced by individuals who
•
are physically and mentally able to operate and / or service the
machine in a safe manner.
•
have been instructed in the proper operation or maintenance of the
machine and have demonstrated competence in these areas.
•
can be trusted to perform their assigned duties in a safe and reliable
manner.
•
are of the legal minimum age for performing such duties.
It is the responsibility of the operator to
•
inspect the machine prior to operation and perform any necessary checks,
adjustments or repairs to ensure safe operation.
•
read and understand the instructions in this manual prior to operation and
to follow them during operation.
•
familiarize him/herself with the local worksite conditions and immediately
remedy any fault that may compromise safety.
•
use the machine in accordance with the appropriate local job site
organization system to ensure safe coordination with other machines,
vehicles, and people on the job site.
Investigate any work site prior to operation to determine whether any special haz-
ards exist. Take necessary measures to eliminate or reduce any hazard.
Do not operate the machine in unsafe conditions including, but not limited
to: in inclement weather (example: electrical storm), near overhead electric lines,
in enclosed areas without proper ventilation, in contaminated areas without nec-
essary safety equipment and personnel.
Turning the key to the off position while the machine is in motion (as described
below) should be done only in an emergency. If done, the machine will stop
abruptly.
To stop all machine movement in case of emergency:
•
Turn the ignition key to the off position (item 15, section 4.1).
R160T / R190T US O&M
0404-490 2014-06
16
Advertisement
Chapters
Table of Contents
