Safety And Performance Tests; Electromagnetic Compatibility (Emc) - Philips IntelliVue CL SpO2 Instructions For Use Manual

10 Specifications
• The IntelliVue CL Hotspot is a Class A product. In a domestic environment this product may
cause radio interference, in which case the user may be required to take adequate measures.
• This equipment generates, uses and radiates radiofrequency energy, and if it is not installed and
used in accordance with its accompanying documentation, may cause interference to radio
communications.
• The device, equipped with a wireless network interface, intentionally receives RF electromagnetic
energy for the purpose of its operation. Therefore, other equipment may cause interference, even
if that other equipment complies with CISPR emission requirements.
EMC Directive Compliance
IntelliVue CL Transmitter Base Station and CL Hotspot
The IntelliVue CL Transmitter Base Station and CL Hotspot comply with the EMC Directive
89/336/EEC
In addition these devices comply with:
CISPR 22:2005 + A1:2005; EN 55022:2006 + A1:2007;
CISPR 24:1997 + A1:2001 + A2:2002; EN 55024:1998 + A1:2001 + A2:2003
Radiofrequency Radiation Exposure Information
IntelliVue CL Transmitter
For body worn operation, this device has been tested and meets FCC RF exposure guidelines when
used in the standard configuration with the rear side towards the body, without a gap. Alternatively, it
can be used with any accessory that positions the front side of the device a minimum of 10 mm from
the body. The accessory itself must not contain any metal parts. Use of other accessories may not
ensure compliance with FCC RF exposure guidelines.
Nevertheless it is strongly recommended to operate the CL Transmitter with the rear side towards the
body to achieve best possible radio performance.

Safety and Performance Tests

You must observe any national regulations on the qualification of the testing personnel and suitable
measuring and testing facilities. See the maintenance section for a list of required tests. Safety and
performance tests, and what to do if the IntelliVue Cableless Measurements does not meet these
specifications, are described in the IntelliVue Cableless Measurements Service Guide.

Electromagnetic Compatibility (EMC)

Take special precautions regarding electromagnetic compatibility (EMC) when using the IntelliVue
Cableless Measurements. You must operate your IntelliVue Cableless Measurements according to the
EMC information provided in this book and in the IntelliVue Cableless Measurements Service Guide.
Portable and mobile radiofrequency (RF) communications equipment can affect the IntelliVue
Cableless Measurements.
70