Trending - Philips IntelliVue CL SpO2 Instructions For Use Manual

2 Monitoring or Collecting Vital Signs
When a cableless measurement device is assigned to a telemetry device, it is not possible for the
telemetry device to be wirelessly assigned or directly connected to a patient monitor.
If the connection between the telemetry device and the NBP Pod or SpO
be displayed at the Information Center:
Monitor.
When using an NBP or SpO
Information Center: When removing the NBP/SpO
range. Otherwise, the
Center. You will have to reboot the telemetry device to clear the INOP at the Information Center.
With IntelliVue GuardianSoftware
The SpO
2
collects non-continuous vital signs data that are transmitted via a Transmitter or Hotspot from the
Pods. Using the collected data, it provides trending, review, reporting and notification. The Guardian
Early Warning Scoring (Guardian EWS) application provides basic assessment guidance, helping you
to recognize the early signs of deterioration in your patients. GuardianSoftware is not intended for
monitoring in combination with Cableless Measurement Devices.
Some of the measurement tasks can be performed remotely from GuardianSoftware. See the table
"Controls Available with GuardianSoftware" on page 29.
GuardianSoftware manages the patient data. If a patient name is available at GuardianSoftware, it will
be also displayed on the Pod. Any update of patient data will be synchronized between the Pod and
GuardianSoftware. The only patient management action available directly at the Pod is
Selecting
profile. The Pod is unassigned and the wireless connection (if any) is discontinued.
If the connection between GuardianSoftware and the NBP Pod or SpO
symbol will be displayed gray at GuardianSoftware. A
Device Compatibility
The Cableless Measurement Devices require the following software levels in the associated equipment:
• Patient Monitor - Release H.0 or above
• Information Center - Release M or above
• Telemetry device TRx4841A/TRx4851A - Revision D.XX
• MX40 wearable patient monitor - Revision A.0 or above
• IntelliVue GuardianSoftware - Revision A.0 or above

Trending

The IntelliVue Cableless Measurement Devices provide data for trending of continuous and aperiodic
parameters. The trended data are only available via a host system. For details on trends see the
Instructions for Use of your host system.
When not assigned to a host during measurement, the IntelliVue Cableless Measurement Devices are
able to collect data in a local memory. These data can be uploaded to GuardianSoftware, but not to
other host systems, when a connection is established at a later stage.
24
INOP will be displayed on the Pod, and an INOP tone will sound.
Pod together with a telemetry device connected to a PIIC iX Release A
2
cl NBP Disconnect
and NBP Pods can be used together with IntelliVue GuardianSoftware. GuardianSoftware
Free Device
removes the current patient from the Pod and resets the Pod to the default
cl SpO₂ Disconnect cl NBP Disconnect
or
Pod, be careful to remove it while it is in SRR
2
cl SpO₂ Disconnect
/ INOP will latch at the Information
No System
Pod is lost, an INOP will
2
No System
. A
Free Device.
Pod is lost, the connection
2
INOP will be displayed on the Pod.