Philips IntelliVue CL SpO2 Instructions For Use Manual page 82

10 Specifications
Performance Specifications
Display Specifications
Type
Viewing Area
Dot Size
Resolution
Backlight
Short Range Radio Specifications
Type
Technology
Frequency Band
Modulation
Bandwidth
Effective Radiated Power (ERP)
WLAN Specifications
Type
Technology
Frequency Band
Modulation Technique
Effective Radiated Power (ERP)
Realtime Clock Accuracy
USB Interface
Standard
Power Input
Connector
LAN Network
82
monochrome (4 gray scales), passive LCD (STN), positive/transflective
25.6 mm x 19.2 mm
0.2 mm x 0.2 mm
128 x 96 pixel
white LED
built in interface with integrated antenna
IEEE 802.15.4
2.4 GHz ISM (2.400 - 2.483 GHz)
DSSS (O-QPSK)
5 MHz
max. 0 dBm (1 mW)
Internal wireless adapter
IEEE 802.11a/b/g
USA: 2.400 - 2.483 GHz, 5.15 - 5.35 GHz, 5.725 - 5.825 GHz
Europe: 2.400 - 2.483GHz, 5.15 - 5.35 GHz, 5.47 - 5.825 GHz
Japan: 2.400 - 2.483GHz, 4.90 - 5.091 GHz, 5.15 - 5.25 GHz
China: 2.400 - 2.483 GHz, 5.725 - 5.85 GHz
802.11b/g
DSSS (DBPSK, DQPSK, CCK)
OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11a
OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
2.4GHz Band - max. 22 dBm
5GHz Band - max. 20.5 dBm
less than 5 seconds per day (typically) as long as device is in power state
"Device on" or "Device off". Automatically synchronized with assigned
patient monitor/telemetry device.
USB 2.0 full speed Device Port
4.5V - 5.5V (3W)
power requirement for service and upgrade of connected Cableless
Measurement devices 2.5W
USB series "Standard-B" receptacle