Using Profiles; Setting The Date And Time - Philips IntelliVue CL SpO2 Instructions For Use Manual

1 Introduction and Basic Operation

Using Profiles

A profile is a set of measurement and general settings which have been customized for a particular
purpose. The Cableless Measurement Devices can have four different profiles configured to your
requirements. The default profile is marked with a symbol. To select a different profile,
Select the
1
Select the required profile from the list.
2
Selecting

Setting the Date and Time

If the Cableless Measurement Device is assigned to a patient monitor or to a telemetry device, the date
and time will be taken from the host. If this is not the case, you can set the date and time on the
Cableless Measurement Device,
1 Select the
Enter the data for date and time one after another.
2
Select
3
If the time has not been set,
16
Profiles
SmartKey or the
New Patient Free Device
or
Main Setup
SmartKey and then
Store Date, Time
.
--:--
Main Setup
SmartKey followed by
will always reset the profile to the default.
Date, Time
.
will display on the device.
Profiles
.