Connecting Spo2 Sensors - Philips IntelliVue CL SpO2 Instructions For Use Manual

3 Monitoring SpO2

Connecting SpO2 Sensors

1 Connect the sensor to the single patient Mobile CL SpO
Insert the SpO
2
matching blue dot inside the cradle.
CAUTION
Make sure that the contacts of the SpO
Secure the cradle on the patient's arm using the wristband.
3
a. Feed the free end of the wristband through the slot in the cradle, starting from the underside
of the cradle.
b. Slide the wristband onto the patient's arm and pull the free end until the wristband fits snugly.
c. Close the wristband using the Velcro patch on the free end of the band.
32
Pod into the Mobile CL SpO
2
2
Cradle (if not already connected).
2
Cradle. The correct orientation is indicated by a
2
Pod and the sensor are dry and free of residues.