Starting And Stopping Measurements; Enabling Automatic Mode And Setting Repetition Time; Enabling Sequence Mode And Setting Up The Sequence - Philips IntelliVue CL SpO2 Instructions For Use Manual

Table of Contents

Advertisement

Starting and Stopping Measurements

Use the setup menu or SmartKeys to start and stop measurements.
Action to be Performed
Start manual measurement
Start Auto series
Start STAT measurement
Stop Manual measurements
Stop current Auto measurement
Stop current STAT measurement and end
STAT mode
Stop Auto, Manual or STAT measurement,
end STAT mode AND Auto/Sequence
series
CAUTION
Use clinical judgment to decide whether to perform repeated series of STAT measurements because of
the risk of purpura, ischemia and neuropathy in the limb with the cuff.
Enabling Automatic Mode and Setting Repetition
Time
In the
1
2
For an automatic measurement, select
measurements.
Enabling Sequence Mode and Setting Up The
Sequence
In the
1
NBP
Mode
menu, select
and select
NBP
Mode
menu, select
and select
NBP Setup menu
Start/Stop
Start NBP Stat
Start/Stop
Start/Stop
Start/Stop
Stop All
Auto
from the pop-up menu.
Repeat
and set the time interval between two
Sequence
from the pop-up menu.
4 Monitoring NBP
SmartKeys
Start/Stop
Start NBP STAT
Start/Stop
Start/Stop
Start/Stop
Stop All
43

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IntelliVue CL SpO2 and is the answer not in the manual?

This manual is also suitable for:

Intellivue cl npb

Table of Contents

Save PDF