Endress+Hauser PROline Prosonic Flow 93 FOUNDATION Fieldbus Operating Instructions Manual page 2

2
Brief operating instructions
These brief operating instructions explain how to commission your measuring device
quickly and easily:
Please read the safety instructions through carefully.
Connecting the transmitter
You require a number of values (such as sensor distance, wire length, arc length,
etc.) to install the sensors. These values can be determined using the transmitter
software. For this reason, the transmitter must first be connected.
Please refer to Page 63 for further information on sensor installation with
transmitters without a local display or without connecting the transmitter.
Switching on the measuring device
Description of the start-up sequence visible on the local display after switching
on the transmitter.
Display and operating elements
A short overview of the different display and operating elements to allow you to
start quickly.
Installing the flowrate measuring sensors Prosonic Flow P (Clamp On)
Installing the flowrate measuring sensors Prosonic Flow W (Clamp On)
Installing the flowrate measuring sensors Prosonic Flow W (Insertion)
Installing the sound velocity measuring sensors DDU 18
Installing the wall thickness measuring sensor DDU 19
Prosonic Flow 93 FOUNDATION Fieldbus
Safety instructions
▼
▼
▼
▼
Installing the sensors
▼
Page 7
Page 41
–
+ – + – + + –
1 2 20 21 22 23 24 25 26 27
Page 61
Page 54
+24.502 l
v
s
Σ
+1863.97 3
3
m
v
%
–50 +50
Esc
+
-
E
Page 19 ff.
Endress+Hauser