Table of Contents
Advertisement
Import from SD
Select the "Import from SD" sub-menu with the
arrow keys of the left or right touch pad and press
the SET button.
Erase model
Copy model–>model
Expor t to SD
Impor t from SD
Copy flight phase
Select the model to be imported from the SD memory
card with the
arrow keys of the left or right touch
pad.
impor t from SD-CARD:
ALPINA
11/03/10
EXTRA
11/03/11
COBRA
11/03/11
BELL47G
11/03/12
05
frei
Notice:
The export date posted at the right end of each model
name line is represented in the format "year/month/day".
After again pressing the
SET
button in the right touch
pad, the "import to model" window will appear Now
the destination memory location can be selected with
the
arrow keys of the left or right touch pad and
confi rmed by pressing the
SET
button or the process
can be canceled with the
ESC
button. A memory
location which is already occupied can be overwritten.
66
Detail program description - Copy / Erase
impor t to model:
01
GRAUBELE
02
ULTIMATE
03
STARLET
04
BELL47G
=>
05
=>
=>
After confi rming the selected model memory by pressing
=>
=>
the
SET
button, a confi rmation request will appear.
=>
=>
modell
01
03
impor t ?
NO
A
NO
response will cancel the process and return the
screen to the originating screen. However, if the
response is selected and confi rmed by pressing the
button then the selected source model will be imported
into the selected destination model memory.
Notice:
•
If the message ...
SD-CARD
INSERT
... appears instead of a screen for model selection,
there is no SD card in the transmitter's card slot, see
page 22.
•
In addition to model data, binding data is also
imported by this process. This means that a receiver
system which was/is bound to the original model
memory can also be operated in the SAME transmitter
by its copy without establishing the bond again.
R12
Copy from phase
R12
Select the "Copy from phase" sub-menu with the
R12
arrow keys of the left or right touch pad then press the
–––
SET
free
ULTIMATE
free
In the "Copy from phase" sub-menu ...
YES
YES
SET
... the fl ight phase to be copied (1 ... 7 for winged
aircraft models or 1 ... 6 for helicopter models) is
selected with the arrow keys of the left or right touch pad
then confi rmed by briefl y pressing the
right touch pad. The next window to appear will be the
"Copy to phase" window. In that window the destination
OK
is to be selected and then also confi rmed. As described
above, another confi rmation request will be issued.
button.
=>
Erase model
=>
Copy model–>model
=>
Expor t to SD
=>
=>
Impor t from SD
=>
=>
Copy flight phase
Copy from phase:
1
2
3
4
=>
5
6
=>
7
SET
button in the
Advertisement
Table of Contents
