Timer Activation By Control Or Switch - GRAUPNER 33124 Manual

Timer confi rmation with control or switch
Examples 4 and 5 of the preceding pages
If you have decided to continue with the model
programming on described on the previous pages for
Example 4, page 247 or 5, page 250 or you intend to
use the C1 joystick (throttle/brake joystick) for the power
regulation completely independently of this example
programming, you can use a control switch for the
automatic starting and stopping of the timer. For this
purpose, fi rst switch to the menu ...
"Control switches"
... and select the line of a control switch which has not
been assigned yet with the arrow keys. After activation
of the control assignment by briefl y pressing the central
SET key of the right touch pad, the following window
appears:
CONTROL SWITCH
G1 Gb1 –75%
Move desired
G2 Gb1 +75%
control adj.
C3 0%
C4 0%
STO SEL
Now simply move the C1 joystick (throttle/brake joystick)
from the motor "OFF" position in the motor "ON"
direction.
The switch to the column above STO using the
appropriate arrow key and move the C1 joystick near the
motor "OFF" position and defi ne the switch point at the
selected position by briefl y pressing the central
of the right touch pad. The switch status is shown to the
right of the control number:
252 Detail program description - Control adjust
CONTROL SWITCH
C1 Ct1
C2
C3
C4
In order to assign the control switch you just crated to
the desired timer, switch to the menu ...
""Timers (gen.)" (page 138 ... 141)
(page 123)
..., and, with the arrow keys, select the line "Top", to
which the "Tim(ers)" are assigned by standard. In this
line, move the marking frame over the "Timer" column to
the right, to the column above the switch symbol, using
the appropriate arrow key of the left or right touch pad.
Now press the central
twice: Pressing once activates the switch assignment
–––
and tapping again opens the list of the "expanded
–––
switches":
–––
–––
Model time
Akkuzeit
Control/fix sw
Oben: Stopp
C1 C2
Mitte: Flug
FXi C1i C2i C3i C4i
Now select the previously programmed control switch,
Ct1 in the example, and assign it to the timer by briefl y
pressing the central SET
SET key
–85% –––
0% –––
0% –––
0% –––
STO SEL
The timer in the base screen now starts with movement
of the C1 joystick toward full throttle and stops if you pull
the C1 joystick back over the switching point.
Example 1 of the preceding pages
If you have decided to continue with the model
programming described on the previous pages in
Example 1 on page 244, fi rst switch to the menu ...
"Control switches"
SET key of the right touch pad
... and select the line of a control switch which has not
been assigned yet with the arrow keys. After activation
of the control assignment by briefl y pressing the central
SET
appears:
0:34h –––
1:23h
0s –––
C3 C4 FX
0s –––
SEL Alar m
Now simply move the respective proportional rotary
key of the right touch pad:
control, e.g. CTRL 7, from the motor "OFF" position in
the motor "ON" direction.
The switch to the column above STO using the
appropriate arrow key and move the selected control
near the motor "OFF" position and define the switch
Model time 0:34h –––
Batt. time 1:23h
Top : Stop 0s C1
Centr :Flight 0s –––
SEL Alarm
key of the right touch pad, the following window
CONTROL SWITCH
G1 Gb1 –75% –––
Move desired
G2 Gb1 +75% –––
control adj.
C3 0% –––
C4 0% –––
STO SEL
(page 123)