GRAUPNER 33124 Manual page 23

GRAUBELE Stop
#01 Flt
«nor mal
5.2V HoTT
K78
3:33h M
Notice:
If a micro SD card is inserted, be sure to remove
it BEFORE taking off the transmitter's backplate.
Otherwise there is a risk of damaging the memory card.
Data acquisition / storage
The storage of data on the SD card is coupled to the
fl ight timer. If this timer is started – when a suitable
memory card is inserted in the card slot and a telemetry
link to the receiver exists – both the timer and data
acquisition will stop when the fl ight timer is stopped. The
fl ight timer is started and stopped as described in the
section "Timers (general)" on page 138.
While data acquisition is ongoing, the on-screen card
image will blink continuously at a slow rate.
The amount of data written on the memory card is
presented as a black bar graph which grows from left to
right as data fi lls the memory card.
After a data acquisition session is fi nished, there will
be an (empty) folder "Models" and a "LogData" folder
on the memory card. Within the "LogData" folder there
will be log fi les in sub-folders that are designated with
names in the format 0001_year-month-day.bin, 0002_
year-month-day.bin, etc. If a model memory folder is still
"unnamed" when the memory card is removed from the
transmitter and inserted into the card slot of a PC or
laptop, the respective log fi les can be found in a sub-
folder designated "NoName". There is a PC program
0:00
available on the transmitter's download web page at
0:00
www.graupner.de with which the stored data can be
»
evaluated on a compatible PC.
5.5V
Importing voice fi les
As already mentioned in the section "Headsets" on
page 21, this connection can also be used to output
the transmitter's acoustic signals as well as those
signals and announcements associated with telemetry
menu settings. These announcements are made in
German language by default. These announcements
are summarized in a voice packet which is stored in a
transmitter-internal memory but they can be replaced
by a voice packet of a different language at any time.
More information about this can be found in the section
"HIDDEN MODE" beginning on page 28.
Importing/exporting model memories
Any model memory can be stored to an inserted memory
card or from an inserted card into the transmitter. This
feature is intended to support data exchange between
identical transmitters or even use as data backup.
More information about this can be found in the section
"Copying/deleting" beginning on page 64.
Notice:
Some special symbols that can be used in model names
are subject to specifi c restrictions associated with the
FAT or FAT32 fi le system used by the memory cards and
these special symbols will be replaced during the copy
process with a tilde (~).
Transmitter description 23