Info Display - GRAUPNER 33124 Manual

Info display

Transmitter ID, date, time and memory card
With the arrow keys of the left or right touch pad, scroll
to the menu item ...
Telemetr y
Basic settings
Ser vo display
Ser vo test
Code lock
info display
... of the multifunction menu. Briefl y pressing the central
SET key of the right touch pad opens this menu:
RFID ABCDEF12
firmware ver.
date 2011/08/01(Mo )
11:22:33s
time
SD-Card
available
Transmitter-specifi c information is shown in this menu
and – insofar as necessary and benefi cial – also
changed.
Select the appropriate line with the arrow keys
of the left or right touch pad and then briefl y press the
central SET key of the right touch pad. In the inverse
value fi eld you can now change the respective default
value – insofar as possible and necessary – with the
arrow keys of the right touch pad and complete your
entry by pressing the central SET key again.
234 Detail program description - Control adjust
RFID
RFID
fir mware ver.
date
time
SD-Card
The RF identifi cation number of the transmitter is shown
in this line. It is transmitter-specifi c, is only issued once
per transmitter and cannot be changed. During the
connection process, this is sent to the receiver, among
other things, so that it is always capable of identifying
1.234
the radio signals of "its" transmitter.
Firmware Version
0MB
RFID
0MB
fir mware ver.
0%
date
time
SD-Card
The current version number of the transmitter software
is shown in this line.
Through a comparison of the number shown here with
the update version offered on the internet download
page of the corresponding product under www.graupner.
de, you can determine whether a current update of the
transmitter operating system is available.
If applicable, the version number is also required for
inquiries with the service department.
Date
ABCDEF12
1.234
2011/08/01(Mo )
11:22:33s
0MB
If necessary, select this line with the arrow keys of the
left or right touch pad and, if applicable, the month or
date fi eld. After activation of the respective value fi eld
by pressing the central
the year, month or date can be set with the arrow keys
of the right touch pad. Pressing the central
the right touch pad again completes the respective entry.
Years ranging from 2000 to 2135 are available.
ABCDEF12 The abbreviated day of the week to the right outside in
1.234
brackets is automatically generated from the respective
2011/08/01(Mo )
date.
11:22:33s
Notice:
0MB
• If the transmitter is connected to a PC as described
on page 39, the date and time can also be set
through the PC program provided for the respective
product on the internet page at www.graupner.de.
• The date and time are protected against data loss
due to power failure by a buffer battery for situations
like a battery change, see page 15.
RFID ABCDEF12
firmware ver. 1.234
date 2011/08/01(Mo )
time 11:22:33s
SD-Card 0MB
SET key of the right touch pad,
SET key of