Free Mixers - GRAUPNER 33124 Manual

to the menu option ...
Fl. phase timers
Wing mixers

Free mixers

MIX active/phase
MIX-only channel
Dual mixer
Fl. phase timers
Helicopter mixer
Free mixers
MIX active/phase
MIX-only channel
Dual mixer
... on the multi-function list. Briefl y tap the center
key on the right touch pad to open this menu option.
Free mixers
Freely-programmable linear and curve mixers
Regardless of the model type you have selected, each
of the 24 model memory slots will offer you eight linear
mixers (M1 ... M8) ...
M1 ??
M2 ??
M3 ??
M4 ??
M5 ??
fr
Typ
... and 4 curve mixers (K9 ... K12), which also offer you
the option of setting non-linear control characteristics:
M8 ??
C9 ??
C10 ??
SET
C11 ??
C12 ??
fr
Typ
In addition, the "MIX active/phase" menu (page 192)
enables you to enable and disable particular mixers
separately for specifi c fl ight phases. On the "Free
mixers" menu, the blocked mixers are then
suppressed in the corresponding fl ight phase. If
you are hunting for a mixer that is not shown, you
should therefore switch to the appropriate fl ight
phase!
In this fi rst section, however, we will concentrate on how
to program the fi rst screen page of the "free mixers". We
will then move on to the method of programming mixer
ratios, both for linear mixers and curve mixers, as found
on the second screen page of this menu.
Basic programming procedure
1. Select the mixer you want by using the arrow keys
on the left or right touch pad.
2. Tap the center
??
input fi eld on the line marked "fr" at the lower edge of
??
the screen is now shown highlighted.
??
3. Use the arrow keys on the right touch pad to select
??
the "fr" mixer input.
??
4. Tap the center
zu
the arrow key
to the column marked "to" on the lower edge of the
screen and then tap the center
touch pad once again.
??
The input fi eld "to" is shown highlighted.
??
5. Use the arrow keys on the right touch pad to select
??
the "to" mixer output.
??
??
6. Tap the center
zu
Optionally, use the arrow key
touch pad to switch to the column marked "ty" on
the lower edge of the screen, in order to include
the trim of the respective joystick in the mixer input
signal ("Tr" for trim) and/or to add series switching for
mixers ...
... and/or use the arrow key
touch pad to switch to the column marked with the
switch icon
Here, tap the center
pad once again and assign a switch, following the
description given in the section "Assigning transmitter
controls, switches and control switches" (page 52).
7. Using the arrow key
switch to the
key on the right touch pad.
Detail program description - Control adjust
SET key on the right touch pad. The
SET key on the right touch pad; using
on the left or right touch pad, switch
SET key on the right
SET key on the right touch pad.
on the left or right
on the left or right
on the lower edge of the screen.
SET key on the right touch
on the left or right touch pad,
column and then tap the center SET
181