Telemetry Data Display - GRAUPNER 33124 Manual

Telemetry data display

As described on page 220 in the context of sub-menu
"SENSOR SELECT" for the "Telemetry" menu ...
Model select
Copy / Erase
Suppress models
Base setup model
Model type
Suppress: TOG
... the output of sensors attached to the receiver can be
processed and activated for graphic presentation on the
screen. This data is then appropriately displayed by the
graphic indicators described below.
These graphic elements can be reached from the
transmitter's base screen by briefl y touching the
keys of the left or right touch pad. Page back and forth
between individual graphic elements with the same keys
and return to the base screen again with the
Notice:
The sequence of the following element descriptions
corresponds to their selection sequence when touching
the key.
More details about the following named modules can be
found in the appendix and in Internet at www.graupner.
de in the web page for the given product.
32 Transmitter description - Telemetry data display
RECEIVER
RX–S QUA: 100%
RX–S STR: 100%
RX–dBm:
TX–dBm:
L–PACK:
RX–VOLT:4.8
CH OUTPUT TYPE:ONCE R–LOW V:4.6
This screen presents the "RX DATAVIEW" of the
Telemetry menu's "SETTING & DATA VIEW", see page
209, with data processed and displayed graphically.
The displayed items are as follows:
Value Explanation
RX-S QUA signal quality in %
or
RX-S ST signal strength in %
RX-dBm reception power in dBm
ESC key.
TX-dBm transmit power in dBm
V PACK Indicates the longest time span in ms
in which data packages are lost in the
transmission from the transmitter to the
receiver.
RX-VOLT current operating voltage of the
receiver's power supply in volts
M-RX V lowest receiver operating voltage since
last startup, in volts
TMP the thermometer depicts the receiver's
current operating temperature
AKKU 1
33dBm
33dBm
10ms
TMP
+22°C
This display depicts current voltage, current current
draw and, if attached, the expended capacity of "Batt 1"
connected to the General-Engine (Order No. 33610),
General-Air (Order No. 33611) or Electric-Air module
(Order No. 33620).
SENSOR 1
If attached, this display depicts currenly measured voltage
and temperature from a "T(EMP)1" temperature/voltage
sensor, Order No. 33612 or 33613 for General-Engine
(Order No. 33610), General-Air (Order No. 33611) or
Electric-Air module (Order No. 33620).
(GENERAL + ELECTRIC modules)
0.0V
0.0A
0mAh
(GENERAL + ELECTRIC module)
SENSOR 1
0.0V
0°C