Joystick Calibration - GRAUPNER 33124 Manual

packet downloaded from the transmitter's web page (e.g.
"voice_gb.vdf") into the folder created by the transmitter.
Now take the memory card out of the card reader and
re-insert it into the transmitter. Once the memory card is
inserted in the transmitter, switch the transmitter on with
RF switched off.
Please select
RF on/off?
ON OFF
Language change
Use the left or right arrow touch key to select the line
"VOICE".
HIDDEN MODE
CONTRAST
LANGUAGE ENGLISH
VOICE
DEUTSCH
STICK CALI.
Activate language selection by pressing the center
key in the right touch pad.
HIDDEN MODE
CONTRAST
LANGUAGE ENGLISH
VOICE DEUTSCH
STICK CALI.
Now use the right touch pad arrow keys to replace the
default language "DEUTSCH" with the language you
want. For example:
HIDDEN MODE
CONTRAST
LANGUAGE
VOICE
STICK CALI.
Confi rm your selection with another tap on the center
SET key in the right touch pad. The selected language
packet will be loaded into the transmitter's memory.
HIDDEN MODE
CONTRAST
LANGUAGE
VOICE
STICK CALI.
0
The loading process is fi nished as soon as the progress
bar at the lower edge of the display disappears.
HIDDEN MODE
CONTRAST
SET
LANGUAGE
VOICE
STICK CALI.
0
When this process is fi nished, switch off the transmitter.
All settings stored in the transmitter remain intact after a
change of language has been made.
Notice:
0
• If the warning ...
ENGLISH
ENGLISH
... appears, then the transmitter's RF radiation is still
active. Jump to the "Basic settings" menu, select
the "RF transmit" line, select its "OFF" option and
then repeat the procedure
• If the warning ...
0
ENGLISH
ENGLISH
22/100%
... appears then the transmitter does not detect a memory
I
card in its card slot or the card found cannot be read.
• If the warning ...
0
ENGLISH
ENGLISH
... appears then the transmitter could not fi nd an
appropriate fi le on the inserted memory card.

JOYSTICK CALIBRATION

If you feel the neutral position of your self-calibrating
joysticks (controls 1 ... 4) are not exactly 0 % of
their control travel, then this can be checked and, if
necessary, corrected as follows.
Jump to the "Model select" menu and initialize a free
model memory as described on page 60. Whether the
model to be initialized is a winged aircraft or a helicopter
is irrelevant.
Transmitter description - Hidden mode
RF
MUST BE
OFF
OK
SD-CARD
INSERT
OK
MISSING
IMPORT
DATA
OK
29