Table of Contents
Advertisement
General settings
Basic transmitter settings
Using the arrow keys of the left or right touch pad, scroll
to the "Basic Settings" menu item of the multifunction
menu:
Telemetr y
Basic settings
Ser vo display
Ser vo test
Code lock
info display
By briefl y pressing the central
SET
key of the right touch
pad, this menu item opens:
BASIC SETTINGS
Own
Stick mode
DSC Output
PPM10
back
Pitch min
Contrast
Display light
unlim.
Power-on beep
Batterie type
Ni-MH
Batterie war ning
Power on war n.
Touch Sense
Region
Euro
Voice volume
Beep volume
General basic settings are entered in this menu ...
specifi c to the transmitter, such as the owner's name
and defaults for new model memories.
The settings saved in this menu in the lines ...
•
"Stick mode",
•
"DSC Output",
224 Detail program description - Control adjust
•
"Pitch min"
... have no infl uence whatsoever on already existing
model memories; they are only defaults, which are
automatically adopted to newly initialized model
memories and can be changed there on an individually
basis at any time in the "Basic model settings"
and "Helicopter type" menus. A change to the
"specifi cations" in this menu, therefore, only infl uences
model memories created at a later time.
Notice:
Settings in this menu are only assigned once for
transmitters. After opening this menu in another model
memory, therefore, the last valid settings always appear.
Select the appropriate line with the arrow keys
1
the left or right touch pad and then press the central
SET
key of the right touch pad. In the inverse value fi eld
you can now change the respective specifi ed value with
0
the arrow keys of the right touch pad and complete your
entry by pressing the central
yes
pad or the
ESC
key of the left touch pad.
4.7V
Own(er)
unlim
2
BASIC SETTINGS
Own
H . J. S a n d b r u n ner
3
Stick mode
3
DSC Output
Pitch min
Up to 15 characters can be used to specify the owner's
name. Change to the next screen page (
pressing the SET key of the right touch pad:
3 4 5 6 7 8 9 : ;
F G H I J K L M N O P Q R S T U V W X
Y Z [ ¥ ] ^ _ ` a
Owner H-J
Select the desired characters with the arrow keys of
the left touch pad. Switch to the next position by briefl y
pressing the arrow key
SET
key to be able to select the next character. A blank
space can be entered by simultaneously pressing the
keys
You can reach any arbitrary character position within the
of
input fi eld with the
You return to the previous menu page by briefl y pressing
the central
Stick mode (specifi cation)
SET
key of the right touch
As a basic principle, there are four different ways to
assign the four control functions, aileron, elevator,
rudder and throttle or brake fl aps for winged models as
well as rolling, pitching, tail rotor and throttle/pitch for
helicopter models to the two joysticks. The model pilot
determines which way to do so according to individual
preferences.
1
PPM10
With the arrow keys
back
select the "Stick mode" line. The selection fi eld is shown
in a box:
) by
! " # $ % & ' ( ) + , – . / 0 1 2
? @ A B C D E
b
c d e f g h i j k
Sandb
of the right touch pad of the
or
of the right touch pad (CLEAR).
keys of the right touch pad.
ESC
key of the left touch pad.
of the left or right touch pad,
Advertisement
Table of Contents
