Thermo Scientific Dionex ICS Series Operator's Manual page 20

Dionex PDA Operator's Manual
CONNECTED
LED Label
CONNECTED
ALARM
DEUTERIUM – UV
TUNGSTEN – VIS
POWER
12
DEUTERIUM - UV
ALARM
Figure 2-2. Dionex PDA Status Bar
LED Status
Lighted
Off
Lighted
Off
Lighted
Flashing
Off
Lighted
Flashing
Off
Lighted
Off
TUNGSTEN - VIS
Function
The Dionex PDA is connected to a Chromeleon 7
instrument or a Chromeleon 6.8 timebase.
The Dionex PDA is not connected to a
Chromeleon 7 instrument or a Chromeleon 6.8
timebase.
A problem has occurred (a leak, for example).
Check the Chromeleon Audit Trail for the cause.
No problems have been detected.
The deuterium lamp is on.
The LED flashes once every second while the
deuterium lamp is firing.
The LED flashes every 0.5 second if a command
is issued to turn on the lamp, but the lamp fails to
turn on (see Section 4.3). If a subsequent attempt
to turn on the lamp is successful, the LED will
automatically stop flashing.
The deuterium lamp is off.
The tungsten lamp is on.
The LED flashes once every second while the
tungsten lamp is firing.
The LED flashes every 0.5 second if a command
was issued to turn on the lamp, but the lamp failed
to turn on (see Section
attempt to turn on the lamp is successful, the LED
will automatically stop flashing.
The tungsten lamp is off.
The Dionex PDA power is on.
The Dionex PDA power is off.
POWER
4.3). If a subsequent
Doc. 065378-01 1/12