Thermo Scientific Dionex ICS Series Operator's Manual page 37

Figure 2-10
Figure 2-10. Example Panel Tabset in Chromeleon 6.8
Two modes of software control are available: direct control and
automated control.
•
With direct control, you select operating parameters and commands
from the Chromeleon 7 ePanels (or Command window) or the
Chromeleon 6.8 Control panels (or Commands dialog box). Direct
control commands are executed as soon as they are entered. See
Section 3.3
•
With automated control, you create a Chromeleon 7 instrument
method or a Chromeleon 6.8 program. An instrument method or
program is a list of control commands, executed in chronological
order, for automated operation of the detector. It can be created
automatically (with the help of a software wizard) or manually (by
editing an existing instrument method or program). See
for details about automated control.
Doc. 065378-01 1/12
shows the Dionex PDA Control panel in Chromeleon 6.8.
for details about direct control.
2 • Description
Section 3.3
29