Power Connection; Signal Cables - Siemens SIPROCESS UV600 Manual

Mounting and connecting
4.5 Electrical connections
4.5.1.3

Power connection

Connect the mains cable to the appliance plug (CEE-22) on the rear of the device.
4.5.2

Signal cables

When delivered, the device is equipped with one or two input/output modules (two modules
as option). The device's signal connections are available to the user on these modules. You
can obtain the standard configuration valid for your device from the device pass (parameter
sheet).
The logical function of the signal connections can be configured individually. You can find
additional information in section Setting parameters for inputs and outputs (Page 142).
See also
Operation (Page 53)
32
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600