Siemens SIPROCESS UV600 Manual page 84

Important functions (selection)
7.2 Diagnostics functions
The following menu is then displayed (example):
The following detailed information can be viewed:
Notation in the menu
Name
Note
Input
Zero
Max. current
Measured value
MR start
MR end
Digital inputs
Menu call:
Main menu → Diagnostics → IO → Digital input
The following menu is then displayed (example):
84
Explanation
Configure the name of analog input
Configured note (reference, comment etc.)
Current input signal
Zero point of electronic signal range (live zero)
Full-scale value of input current range
Input signal as measured value
Start-of-scale value of physical measuring range
Full-scale value of physical measuring range
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600