Siemens SIPROCESS UV600 Manual page 80

Important functions (selection)
7.2 Diagnostics functions
Display validation results
Menu call:
Main menu → Diagnostics → Validation results.
A menu with the data of the last validation is then displayed.
1. Use the
and select using the
2. Then select one of the parameters 'Zero' 'Ref. point'.
The following menu is now displayed (example):
The following parameters can be displayed:
Display
Date
Time
Setpoint
Actual value
80
and keys to navigate to the desired component or auxiliary value,
key.
Description
Current date (representation: DD-MM-YY)
Current time (24-hour representation)
Setpoint of the used calibration gas
Actual value of the used calibration gas (mean value)
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600