Siemens SIPROCESS UV600 Manual page 96

Important functions (selection)
7.3 Calibration and validation functions
Setting the interval of a cyclic procedure
The following menu is displayed following selection of the second parameter (2 Interval):
Lines 3 and 4 show the smallest possible and largest possible numerical values; the desired
numerical value can be entered in line 2 as described in section Character input (Page 64).
Setting the time unit
The following menu is displayed following selection of the third parameter (3 Time unit)
(example):
Set the desired time unit using the
96
and keys, and confirm with
Operating Instructions, 10/2013, A5E03529375-02
.
SIPROCESS UV600