Siemens SIPROCESS UV600 Manual page 82

Important functions (selection)
7.2 Diagnostics functions
The following detailed information can be viewed:
Notation in the menu
NO
Current
Zero
Range sel.
Status (AOnR)
Range 0
Range 0 Start
Range 0 End
Range 1
Range 1 Start
Range 1 End
Digital outputs
Menu call:
Main menu → Diagnostics → IO → Digital output
The following menu is then displayed (example):
The menu displays all digital outputs which have a function, together with their current
statuses (0 = inactive, 1 = active). You must take into account the set switching logic (see
menu 5.7.2 in section Configuring the digital outputs (Page 145)). In order to obtain detailed
information on a digital output, select it using the
the
82
Explanation
Assigned measured component
Actual output value
Live zero (zero of output current range)
Mode of output range selection
Current output range (0/1) [AOn = assigned analog output]
Activation status of output range 0 (on/off)
Physical start-of-scale value of output range 0
Physical full-scale value of output range 0
Output range 1: same parameters as range 0
key.
and keys and then by pressing
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600