Control Keys - Siemens SIPROCESS UV600 Manual

Operation
6.1 Control panel, display and control elements
6.1.3

Control keys

MEAS key
The MEAS
● Short tipping of the MEAS key calls the measured-value display
● Long pressing of the key calls the contrast setting (see Setting the contrast (Page 46))
Function keys
Each of the four function keys
menu/submenu. The current assignment of the function keys is displayed in the bottom line
of the respective menu. The following functions are available: In order to activate a key, it is
sufficient just to touch it.
Table 6- 1 Assignment of function keys
Display Function
Return to previous menu.
Inputs/modifications which have not been saved are rejected.
Call current device status (see Setting the contrast (Page 46))
Call/start the selected menu function
Change to edit mode
Call main menu (see Menu system (Page 59)
Save and terminate an input
Save settings
Select a function or a character
Start procedure
In a selection list: Move input cursor up
•
During an input: Jump to next character
•
Move input cursor down
Move input cursor to left
Move input cursor to right
See also
Maintenance status on/off (Page 121)
56
⑥
key has the following functions:
⑦
can assume different functions depending on the
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600