Introduction
1.1
Purpose of this documentation
These instructions contain all information required to commission and use the device. It is
your responsibility to read the instructions carefully prior to installation and commissioning. In
order to use the device correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2
History
Issue
01
10/2011
02
10/2013
1.3
Checking the consignment
Check the device packaging for damage. Inform your supplier of any damage. Retain the
damaged parts for clarification.
Check the scope of delivery by comparing the shipping documents with your order for
correctness and completeness.
Do not take damaged or incomplete devices into operation under any circumstances.
Special conditions for storage and transportation of device listed in Section "Auto-Hotspot".
SIPROCESS UV600
Operating Instructions, 10/2013, A5E03529375-02
Comment
First edition
Revision of significant functions
1
9