Siemens SIPROCESS UV600 Manual page 76

Important functions (selection)
7.2 Diagnostics functions
Measured values as list
Menu call:
Main menu → Diagnostics → Measured values → List.
The following menu is then displayed (example)
Use the
Measured values as bargraph
Menu call:
Main menu → Diagnostics → Measured values → Bargraph.
The following menu is then displayed (example)
The bargraph contains the following information:
● The measured component is displayed on the left above the bargraph, and the current
value on the right
● The start-of-scale value is displayed on the left below the bargraph, and the full-scale
value on the right. The unit is displayed between them
● The bargraph is the representation of the measured value in relation to the measuring
range.
Use the
76
and keys to navigate to further measured values (if present).
and keys to navigate to further measured values (if present).
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600