Important functions (selection)
7.3 Calibration and validation functions
The following menu is displayed (example):
The phase is displayed in the status line, the other parameters are as follows:
Display on screen
1 Remaining time
2 NO
3 Mean value
4 Zero gas
5 Cancel (not shown here)
116
Description
Remaining time for current phase
Component with current measured value (actual value)
Mean value of measured values (during the 'Measuring' phase)
Name of calibration gas with setpoint
Cancel current procedure
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600