Important functions (selection)
7.3 Calibration and validation functions
The following menu is displayed with the set digital outputs (example).
You can select the desired digital output using the
follow-up menu for setting the switching logic using the
The parameters have the following meanings:
Direct
Inverted
Set the desired switching logic using the
102
The digital output is electronically activated (relay is pulled-up) if the source
is also in the logical activated status (open-circuit principle).
The digital output is electronically activated if the source is in the logical
deactivated status (closed-circuit principle).
If the source is logical activated, the switching output is electronically in the
deactivated status (relay dropped-out)
and
keys. Switch to the
key.
,
and
keys.
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600