Siemens SIPROCESS UV600 Manual page 124

Important functions (selection)
7.4 Maintenance functions
Analog outputs
Following selection of the analog outputs, the following menu is displayed with the possible
analog outputs.
Use the
the test by pressing the
Analog output 4 has been selected here as example.
Lines 3 and 4 show the minimum and maximum values; you can set the value which the
analog output should have in line 2.
124
, and keys to select the analog output to be tested, and terminate
key.
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600