Activate/Deactivate Measured Values - Siemens SIPROCESS UV600 Manual

Important functions (selection)
7.5 Parameter assignments
5.9
5.9.1
5.9.2
5.10
5.10.1
5.10.1.1
5.10.1.1.x
5.10.1.1.x.1
5.10.1.1.x.2
5.10.1.1.x.3
5.10.1.1.x.4
5.10.1.1.x.5
5.10.1.1.x.5.n
5.10.1.2
5.10.1.2.1
5.10.1.3
5.10.2
5.10.3
5.10.3.1
5.10.3.2
7.5.2

Activate/deactivate measured values

This function enables you to hide the measured values of a component. This can be
advantageous if the current measured values are implausible (e.g. because of an external
fault) or if the analyzer cannot measure temporarily (e.g. because a module is defective).
Menu call:
Main menu → Parameters → Measured values
130
Date - time
Date
Time
Extra functions
Measuring point switchover
Measuring points (MPi)
Name of measuring
point
On/off
Name
Purging time
Measuring time
Status
DOn
Status (MPS)
DOi
Measured values
User functions
Display setting
Timeout with login
Automatic light-off
✓ See section Setting the date and
time (Page 151)
✓
✓
✓
✓
✓
✓ See section Programming the
measuring point switchover
(Page 153)
✓
✓
✓
✓
✓
✓
✓ See section Status output for the
switchover phase (Page 155)
✓
✓ See section Selecting the
measuring point display
(Page 155)
✓ See section Starting user
functions (Page 156)
✓
✓ See section Setting the waiting
time for automatic logoff
(Page 157)
✓ See section Setting the waiting
time for automatic display switch-
off (Page 158)
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600