Xilinx Virtex-7 FPGA VC7215 Getting Started Manual page 18

5. In the Select Hardware Target window, the xilinx_tcf cable appears under
Hardware Targets. The JTAG chain contents of the selected cable appear under the
Hardware Devices window (
Clock Frequency at the default value (15 MHz). Cick Next.
X-Ref Target - Figure 1-12
6. In the Open Hardware Target Summary window, click Finish. The wizard closes and the
Vivado Design Suite opens the hardware target.
VC7215 Getting Started Guide
UG970 (Vivado Design Suite v2015.1) April 27, 2015
Chapter 1: VC7215 IBERT Getting Started Guide
). Select the xilinx_tcf target and keep the JTAG
Figure 1-12
Figure 1-12: Select Hardware Target
www.xilinx.com 18
Send Feedback