7. A Customize IP window opens. In the Protocol Definition tab, change LineRate (Gbps)
to 13.0. Then use the drop-down menu to change the Refclk (MHz) to 325.00. Keep the
defaults for other fields
X-Ref Target - Figure 1-24
VC7215 Getting Started Guide
UG970 (Vivado Design Suite v2015.1) April 27, 2015
(Figure
1-24).
Figure 1-24: Customize IP - Protocol Definition
www.xilinx.com
Chapter 1: VC7215 IBERT Getting Started Guide
33
Send Feedback