Xilinx Virtex-7 FPGA VC7215 Getting Started Manual page 17

2. In the Hardware Manager window, click Open New Target (highlighted in
X-Ref Target - Figure 1-11
3. An Open Hardware Target wizard pops up. Click Next on the first window.
4. In the Hardware Server Settings window, select Local server (target is on local
machine). Click Next to open the server and connect to the Xilinx TCF JTAG cable.
VC7215 Getting Started Guide
UG970 (Vivado Design Suite v2015.1) April 27, 2015
Figure 1-11: Open a New Hardware Target
www.xilinx.com
Chapter 1: VC7215 IBERT Getting Started Guide
Figure 1-11).
17
Send Feedback