Warning Lights - Zetor UTILIX HT Series Operator's Manual

CONTROLS, INSTRUMENTS & OPERATIONS

Warning lights

U18N017
The high beam indicator light comes on on the instrument panel.
The low beam indicator light comes on on the instrument panel.
The parking brake lights up when the tractor is braked with the manual parking brake.
PTO monitor lamp Shows the revolution of PTO.
Fuel Level If it comes on while the engine is running, fill the tank with fuel.
The oil pressure indicator light turns off when the engine starts, in case the oil pressure is OK. If
it comes on while the engine is running, stop the engine and contact a specialized service.
Charge lamp
This light will go off as soon as the engine starts to run to indicate that the alternator is changing.
(Please note, as broken fan belt can cause the light to come on, please stop the engine as
overheating can occur if not rectified immediately)
The glow indicator light indicates preheating when starting at low temperatures.
Cruise Control Lamp
Will turn on when cruise control is engaged.
The Forward F indicator light comes on when the forward travel pedal is depressed. The
Forward R indicator light comes on when the backward travel pedal is depressed.
The indicator light comes on when the start key is in ON position and the safe start conditions
are not met.
Conditions for safe start:
1. The brake pedal is depressed.
2. The PTO ON / OFF switch is in the OFF position.
If the light comes on when safe start conditions are met, there is a problem with one of the
electrical parts of the machine.
47