Hazard Warning Lights Switch
To turn on the hazard warning lights, press the hazard warning light switch once (left and right turn signal
lights flash).
To switch the hazard warning lights off, press the hazard warning light switch again.
Instrument Panel Indicator Lights
Charge lamp
This light will go off as soon as the engine starts to run to indicate that the alternator is changing.
(Please note, as broken fan belt can cause the light to come on, please stop the engine as
overheating can occur if not rectified immediately)
The oil pressure indicator light turns off when the engine starts, in case the oil pressure is OK. If
it comes on while the engine is running, stop the engine and contact a specialized service.
PTO Indicator Light Indicates PTO activation.
Fuel Level If it comes on while the engine is running, fill the tank with fuel.
The High Beam Indicator Light comes on using the combination switch.
The Low Beam Indicator Light comes on using the combination switch.
Preheating Indicator Light indicates preheating of the combustion chamber.
42
CONTROLS, INSTRUMENTS & OPERATIONS