Warning Lights - Zetor UTILIX CL Operator's Manual

CONTROLS, INSTRUMENTS & OPERATIONS

Warning lights

UCL18N016
High beam lamp is operated on the combination switch.
Low beam lamp is operated on the combination switch.
Parking brake is operated when footbrake is engaged.
PTO monitor lamp Shows the revolution of PTO.
Fuel Level If it comes on while the engine is running, fill the tank with fuel.
Oil pressure lamp will go out as soon as the engine starts if the oil pressure is correct. If it comes
on while the engine is running, stop the engine and get expert advice.
Charge lamp
This light will go off as soon as the engine starts to run to indicate that the alternator is changing.
(Please note, as broken fan belt can cause the light to come on, please stop the engine as
overheating can occur if not rectified immediately)
Glow signal Lamp indicates preheating
44