DESCRIPTION OF TRACTOR CONTROLS
HODP048
Warning Lights
Charge Indicator Light
The indicator light goes off as soon as the engine is running and the alternator starts charging.
(Note that a broken V-belt may cause the control indicator to come on, in such case stop the
engine as overheating might occur if the defect is not rectified immediately.)
Oil Pressure Indicator Light
The light comes on when engine oil lubrication problems occur. Stop the engine and check the
engine oil level, or have the engine repaired by an authorized service.
PTO Monitoring Indicator Light
Indicates PTO shaft activation. (see pages 3 - 6.)
Air Cleaner Filter Contamination Indicator LightThis light comes on when the air cleaner is
clogged with foreign materials. When it lights up, open the cover and clean the inside of the
cleaner. Clean the filter element using compressed air, blow the compressed air through the
filter in the intake air direction, or replace the filter with a new one.
The indicator light indicates that the high beam lights are activated.
The indicator light indicates that the low beam lights are activated.
The indicator light indicates that the parking brake activated.
Fuel level: if it comes on when the engine is running, refuel the tank.
Glowing indicator light: the illuminated light indicates operation of the pre-heating systém.
47