Relay Codes Assignment - Rosslare CSN SELECT AYC-6355 Series Installation And User Manual

Smart card readers/controllers (rev. b)
Table of Contents

Advertisement

Controller Functionality
The right LED flashes orange.
The controller is now waiting for the Primary code of the user you
want to delete.
4. Perform one of the following:
Enter the 4- to 8-digit PIN code of the
Primary code belonging to the user you
want to delete.
Present the user card of the Primary code belonging to the
user you want to delete.
The left LED flashes red.
5. Enter your 4-digit Programming code to
confirm the deletion.
If the Programming code is valid, you hear three beeps and the
unit returns to Normal mode.
If the Programming code is invalid, you hear a long beep and the
unit returns to Normal mode.
7.9.16

Relay Codes Assignment

When a primary code is enrolled for any user, the user is authorized
to activate the Lock Strike relay. However, different user codes may
be set to operate the auxiliary relay instead or operate both the Lock
strike and auxiliary relay. Assignment of such codes is achievable for
any valid user code entered in the controller.
There are two methods to assign relay codes to users: a standard
method and a search method.
62
AYC-x6355 (Rev. B) Installation and User Manual
Red Orange
Red Orange

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSN SELECT AYC-6355 Series and is the answer not in the manual?

This manual is also suitable for:

Ayc-h6355Ayc-m6355Ayc-q6355

Table of Contents