Deleting Primary And Secondary Codes - Rosslare CSN SELECT AYC-6355 Series Installation And User Manual

Controller Functionality
The left LED flashes red.
If the Primary code entered is not valid, you hear a long beep and
the unit continues to wait for a valid Primary code.
5. Perform one of the following:
Enter the 4- to 8-digit code to be used as

the Secondary code.
 Present the user card to be used as the Secondary code.
If the Secondary code is valid, the controller beeps three times
and returns to Normal mode.
If the Secondary code is invalid, the controller sounds a long
beep, and the unit continues to wait for a valid Secondary code
to be entered.
7.9.15 D eleting Primary and Secondary Codes
5 2 B
When deleting a user slot, both the Primary code and the Secondary
code are erased.
There are two methods to delete Primary and Secondary codes – the
Standard Method and the Code Search Method.
7.9.15.1 D eleting Primary and Secondary Codes using Standard
7 6 B
Method
It is recommended that a record be kept of added and deleted
users so that it is easier to keep track of which user slots are
empty and which user slots are not.
To delete the Primary and Secondary codes using the Standard
Method:
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
60 AYC-x6355 (Rev. B) Installation and User Manual
Red Orange
Green