Changing Auxiliary Code - Rosslare CSN SELECT AYC-6355 Series Installation And User Manual

Controller Functionality
7.9.4

Changing Auxiliary Code

The Auxiliary code is mainly used as a method to quickly test the
Auxiliary Relay during installation.
When the first user is added to the controller, the default Auxiliary
code is automatically deleted. Once the code is programmed again, it
is not deleted with the entry of additional user codes.
To change the Aux iliary code:
•
Auxiliary code does not work in the Secure mode.
•
Wrong entries return the controller to Normal mode.
•
Code 0000 erases the Auxiliary code.
•
The factory default 4-digit Auxiliary code is 0852.
To change the Aux iliary code:
1. Enter Programming mode.
2. Press 2 to enter Menu 2.
The left LED turns orange.
3. Enter the new code you wish to set as the
Auxiliary code.
You hear three beeps.
The system returns to Normal mode.
46 AYC-x6355 (Rev. B) Installation and User Manual
Green
Orange Green
Green